Showing posts with label Welding. Show all posts
Showing posts with label Welding. Show all posts

Sunday, September 19, 2010

Solder Pick Jewelers Welding Soldering Bench Torch Tool








Available at Amazon Check Price Now!





Solder Pick Jewelers Welding Soldering Bench Torch Tool










   Brand: Findingking




   Availibility : Usually ships in 1-2 business days





Solder Pick Jewelers Welding Soldering Bench Torch Tool Overviews




Soldering Pick For Soldering Jewelry & Metal Repairs. This is a new soldering pick. Perfect for computer, electronic, and jewelry repair. Has a fine machined tip that collects the exact amount of solder for precise application. It measures approximately 6 1/4" (158.75 mm) long We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.










*** Product Information and Prices Stored:Sep 19, 2010 03:50:25

Available at Amazon Check Price Now!

Sony Bluray Disc Player Sale Slimfast Online Lower Prices Dog House Online Shop

Friday, September 10, 2010

Welding 4130 Steel Tubing - Tig Welding Chromoly Up in Here

4130 Chromoly tubing is used for all kinds of applications, but 2 of the main ones are for airplanes and for racing just about anything from motorcycles, to mountain bikes, to go-carts.

AISI 4130 tubing is strong. It's real strong. So the reason it is so popular among race car and airplane builders can use thinner tubing and that translates into speed and less weight.

Welding 4130 steel tubing is not that hard. There seems to be some mystique around it but it actually welds better than plain carbon steel.

So then whats all the fuss about?  Well there is one thing. If it cools too quickly, 4130 chromoly tubing will be hard and brittle in the heat affected zone of the weld.

Thats the main thing to be concerned about. So how do you prevent the weld area from cooling too quickly?


Make sure the ambient temperature is above 60 degrees F.
Use a small propane torch to preheat weld area to about 100-150 F. 300 degrees F if room air is below 60 degrees.
Weld a little bit slower than you would for plain carbon steel.
Dont use 4130 tig welding rods. Use E70S2.
Never speed cool anything.

Some frequently asked questions about tig welding 4130 steel tubing are:

Q. Do I need to heat treat the weld when I am done welding?

A. No, the term heat treat is often misused. What is usually meant when it comes to welding chromoly is "stress relief". A stress relief can be done with an oxyfuel torch and a 900 degree F temp stick or a digital pyrometer. But it is usually unnecessary unless the thickness exceeds one eighth inch.

Q. Do I need to back purge my Chromoly welds with argon gas?

A. It always helps, but think about how many oxy acetylene welds there are out there doing fine that were done with no purge.

Q. What about using 308 stainless for welding chromoly?

A. there is a bunch of discussion on Baja Racing forums on this subject. I can tell you that lots of welders are using er308 tig welding rod with success, but for airplanes, E70S2 is the way to go.  One thing that might not occur to you that you should consider is that if you ever needed to weld repair something and all you had was a gas welding torch, the E70s2 would be easily welded over with an oxyfuel rig.  The 308 stainless welds? Not so much.

Front Load Washer Online

Wednesday, August 18, 2010

Smith Soldering Welding Torch Regulators 2








Available at Amazon Check Price Now!





Smith Soldering Welding Torch Regulators 2













   Availibility : Usually ships in 1-2 business days





Smith Soldering Welding Torch Regulators 2 Overviews




Oxygen & Propane Regulators For Regulating GasesThis is a new set of 2 regulators. These are designed for use with the "Little Torch" but can be used with any torch. They are easy to read and equipped with safety check valves to prevent dangerous reverse flow of gases. Each has dual filters for extra high pressure seat protection and is made of a solid brass industrial construction.You receive: One oxygen regulator. One propane regulator.










*** Product Information and Prices Stored:Aug 18, 2010 23:40:30

Available at Amazon Check Price Now!

Best Buy PS3

Monday, August 16, 2010

Pot Metal Pewter Soldering Repair Welding Part Paste








Available at Amazon Check Price Now!





Pot Metal Pewter Soldering Repair Welding Part Paste













   Availibility : Usually ships in 1-2 business days





Pot Metal Pewter Soldering Repair Welding Part Paste Overviews




Pewter Solder Paste For Soldering Ceramics, Metals and Pewter Objects. This is a new tube of pewter solder paste. This solder paste is corrosion resistant with excellent color matching abilities and are great for pewter objects. This paste melts at only 400F. The tube contains 7.1 grams.










*** Product Information and Prices Stored:Aug 16, 2010 22:10:23

Available at Amazon Check Price Now!

Hiking Boots Online Shop Vinyl Tablecloth

Welding Aluminum Using GTAW Aka the Gas Tungsten Arc Process - Compared to Welding Steel

Welding aluminum is harder than welding steel. Why? Because everything that can go wrong on steel is magnified times 10  when you are Tig welding aluminum.

Cleanliness, machine settings, arc length, welding with a dirty  tungsten electrode, torch angle, filler rod angle, type of electrode, and size of electrode . You name it, When you weld aluminum, its just more important to get all these things right,


If the aluminum you are welding has been left outside, like a boat dock ladder, or aluminum boat propeller, it is most likely heavily oxidized. It needs to be cleaned or it will weld like Fido's butt.
The machine settings have to be right too. Alternating current is the name of the game for tig welding aluminum and the  high frequency switch  needs to be on continuous...otherwise the arc will stutter.
Amperage is usually controlled with the foot pedal and with steel, you dont have to continually adjust amperage. At least not much. But since aluminum is such a good heat conductor, your foot pedal amperage control will get a workout. (Some tig welders even use the foot pedal to pulse the amperage to overcome heat buildup and to get the stack of dimes look.)

Arc length is important on steel, but on aluminum it is even more critical, too long an arc length and the heat will not be pinpointed enough casing your rod to ball up and contaminate, too short an arc length and metal will seem to jump on your electrode causing you to cuss like a sailor.
With steel, sometimes you can get away with a slightly dirty electrode... no big deal. But on aluminum, a dirty tungsten takes all the fun out of welding.  The weld will be sooty and will prompt your buddies to make fun of you.
Too much torch angle will cause the heat to melt the tip of your filler rod and the  filler wire will blob into the puddle,. This happens on steel too, just not as bad.
Type of tungsten electrode matters a lot too, especially if you are welding with a newer inverter type tig welder.  Old timers used to insist on using pure tungsten for tig welding aluminum. With the new tig inverters, using pure tungsten to weld aluminum will make you ask for a refund on your welding machine.
And what about the size of your tungsten electrode? With steel, it is possible to use a 3/32" tungsten for almost everything except razor blades. With aluminum, you need to use the right size electrode for different thickness metal. You really need to keep some 1/16", 3/32", and 1/8" tungsten handy and be willing to change electrodes when the  job calls for it...and sometimes even in the middle of doing the same job.

Do you get the picture yet? Welding aluminum is just plain harder because everything matters more.

Front Load Washer Online Lower Prices Dog House Online Shop High definition DJ Headphones

Friday, July 30, 2010

Learn How to TIG Weld by Welding Aluminum

Aluminum sheet metal is cheap compared to stainless steel and other metals.

It costs a bit more than carbon steel but if you use it wisely it is the best way to learn how to weld using the TIG process.

Here is why:


Aluminum does not form a gray flaky oxide layer that makes welding difficult
Tig Welding Aluminum forces you to use your filler wire feeding hand more than welding steel
The thermal conductivity of aluminum forces you to be aware of changes in amperage requirements
Tig welding aluminum forces you to learn about the tig welding machine control settings

If you want to get a lot of welding practice without having to stop and clean the metal, if you want to learn how to read a welding puddle and maintain consistency of weld size and penetration, if you want to learn how to hold the torch, use the right torch angle, and the correct arc length,

Then get yourself some aluminum that is about 1/8 " or.125" thick ( anything close to that thickness will do) and stack beads on it overlapping one bead with the next one. It does not matter what kind of aluminum you use...3003, 6061, 5052, its all good!

Practice different angles, practice using your left hand along with your right hand, practice using a small filler rod and practice a big one, practice making tightly spaced ripples and practice make a stack of dimes appearance with ripples 1/8" apart...

This is your time to learn.

Its practice time, time to make mistakes, time to try different welding techniques, time to pay attention to what works and what doesn't work.

Go ahead and tell yourself you are going to throw the piece away when you are done and don't let anyone see it... and give yourself permission to try some crazy stuff.

How else are you going to get better?

Hiking Boots Online Shop

Sunday, July 18, 2010

Acetylene and Oxygen Cutting Torch - OSHA Says Oxyfuel Safety is Part of Welding Safety

Two Oxyfuel Safety Horror Stories - and one of them could have been a tragedy.

Story #1

A worker was returning from a lunch break and preparing to complete his task of cutting a truck u joint with an oxygen acetylene torch.

He turned on the Acetylene valve and then proceeded to open the valve on the oxygen tank. The oxygen regulator exploded which then saturated his shirt with oxygen. His shirt ignited and burn him severely on his torso. The cause of the accident was determined to be Regulator Burnout or RBO caused by the worker not bleeding down the pressures when he left for lunch.

Story #2

A worker was preparing for July 4th festivities by filling latex gloves with an oxygen and acetylene mixture. His plan was to be the hit of the neighborhood by lighting these latex glove bombs later that night. As he was carrying an armload of the explosive latex balloons, a static spark from the latex rubbing together made them all explode. A burned chest, some permanent hearing loss, and dislodged kidney stones that he wasn't even aware of were the price for stupidity that day. Had they ignited in the trunk of his Camaro, which is where he planned to put them, he would probably not have survived.

Oxyfuel equipment is dangerous.

Story #1 is understandable but entirely preventable by using known oxyfuel safety principles

Story #2 is natural selection at work. There is no excuse . And yet I sometimes see YouTube videos of people filling balloons with oxygen and acetylene and I think to myself "Holy Crap, they are all going to Die!"

High definition DJ Headphones Army Pants Store

Thursday, July 15, 2010

Welding Masks - Better Safe Than Sorry

Welding is serious business; typically to weld once must use a torch. The torch that is used can easily burn the retinas of the eyes. A welding mask protects the eyes and the rest of the head from the sparks that fly around while welding.

History

The first welding helmet was devised to protect the eyes and head from the ultraviolet rays that are produced by the arc welder. It was very heavy and had two dark peep holes that the wearer could look out of.

The original mask was lined with asbestos to prevent burns, however unfortunately for the users of this type of mask it was determined a few years down the line that asbestos was very hazardous to breathe in. Many of the users of these early masks wound up very ill with lung cancer that was directly over time linked to using the original type of mask. There was usually a leather hood that was worn underneath the mask and draped over the shoulders and covered the neck to add additional protection. It is hard to find a mask that is new that still has the leather hood available.

Over time the mask has evolved into a much lighter structure. The lens now is usually one solid piece and is clear but treated to protect the eyes, it darkens like some sunglasses do when it detects the change in the light produced by the welding and will darken to adjust. Many welders still complain that the welding mask is bulky and can block their view, but working without a welding mask especially when arc welding is very dangerous and can cause serious injury to the eye.

Welder's eye is very painful; the eye becomes extremely swollen, red and hurts. Sometimes even with the benefit of the welding mask welder's eye occurs. Immediate medical attention is needed to tend to this condition.

Costs

A welder mask can be quite expensive, but it is a very necessary piece of equipment. Welding cannot be accomplished without the safety of a welder mask.

An inexpensive welding mask can be purchased for less than $20 this is probably not the best choice because it may not provide the protection needed.

The better models sell for between $200 to $500 dollars; the auto darkening models will cost the most.

A welding mask is a necessary item and money spent to purchase one should not be skimped on.

Cheaper Bestseller Books On Sale

Saturday, July 3, 2010

TIG Welding Torch - Which One Do I Need?

A TIG torch is a TIG torch. Right? Not so fast.

There are many different styles of TIG welding torches and if you get the wrong one, its like buying shoes that don't fit...painful. So which TIG torch do you need? First of all, you need to decide whether to go with air cooled or water cooled.

If you are a hobbyist welder, air cooled is the way to go. Why? For one thing, water coolers cost around 600 dollars and air cooled TIG torches dont need a water cooler. That's why.

Once you decide between an air cooled vs water cooled torch, then you still have some decisions to make. Like whether to get a big TIG torch or a small one, a TIG welding torch with a gas valve built in or without, a flex head vs a rigid head, a 12 foot vs or a 25 foot torch, etc.

Here is a list of suggestions to guide you to buying the right TIG torch for your situation:

If you need portability, a 25 foot torch is the way to go.
For portable situations that require fairly high amperage like aluminum TIG welding, the big style air cooled torches like a number 17 or 26 are in order.
For small precise and low amperage situations, a small gas cooled torch like a wp9 works great.
If you are using a TIG welding inverter like a Miller Dynasty 200 DX or a Lincoln Invertec V205t, you may only need a 12 foot torch because the machine itself can be positioned close to the work.
If you can afford it, a coolant re-circulator like a Miller Coolmate opens up your options and lets you use pretty much any TIG welding torch you want.

Front Load Washer Online http://peg-perego-stroller-online.blogspot.com/ Sale Slimfast Online

Monday, June 28, 2010

Soldering & Welding Pan Stained Glass Tool








Available at Amazon Check Price Now!





Soldering & Welding Pan Stained Glass Tool













   Availibility : Usually ships in 1-2 business days





Soldering & Welding Pan Stained Glass Tool Overviews




Annealing Pan For Soldering Jewelry & Annealing. This is a new annealing pan. This pan rotates 360 degrees on ball bearings for unlimited access to work. It has heat reflecting pumice for uniform heat when annealing or soldering. It comes with 1 pound of pumice. It measures approximately 7" (177 mm) in diameter.










*** Product Information and Prices Stored:Jun 28, 2010 11:00:08

Available at Amazon Check Price Now!

Cheaper Bestseller Books On Sale Hottest Deals Outlet Online Bicycle Trailer Store

Thursday, April 29, 2010

How to Keep Yourself Safe While Welding

Welding is a rewarding practice which requires proper training and safety procedures to be followed in order to keep everyone safe. This process may also be referred to as "Oxy-welding and cutting" and as the name implies the machines employed in this process use oxygen and fuels in order to produce intense heat which is capable of cutting extremely hard metals. The main fuel used to power these machines is called "Acetylene".

When the main fuel (acetylene) is burned and mixed with oxygen it can produce extreme temperatures, they usually range between 3200 and 3500 Celsius which is the equivalent of 5800-6300 Fahrenheit; with such extreme temperatures it goes without saying that proper safety precautions must be taken in order to keep yourself and those surrounding you safe. Since the fuels used to weld are extremely flammable, they should be kept in rooms with controlled temperature and in some cases pressure.

Other fuels used to weld and cut metals are: gasoline, hydrogen, methylacetylene-propadiene or MAPP gas, propane and propylene. Depending on the type of job a different type of fuel must be used, for instance underwater welding has to be done using hydrogen as the main fuel since acetylene becomes very unstable at 33 feet.

Before welding you must always check the equipment for leaks or malfunctions, you should also wear protective goggles or special masks which will cover your eyes and prevent the intense radiation from causing them harm, special gloves and even still toe boots should be used while welding.

You must also learn to identify the functions of the welding machine as well as the types of torches used for different tasks, some of the torch types are:

Welding Torch: its function is to melt and weld metals, it has two pipes and no oxygen-blast trigger.

The Rose-bud Torch: this name was given to it because the end of the flame looks like a rose-bud, it is used to heat metals and reshape them instead of melting the substance or cutting it.

Injector Torch: these torches have a small head which injects oxygen and relies on the Venturi effect to drag fuel gas along with it.

Cutting Torch: has three pipes one of which carries oxygen which can be adjusted through the oxygen-blast trigger, the main purpose of this torch is to cut metals.

Different torch types must be used according to the task, however the safety procedures remain the same, so remember to wear protective equipment, use respirators to avoid inhaling hazardous fumes produced by chemical reactions of the fuel and the burning metal and run a thorough assessment about your surroundings and the risk of fire.

Body Glove Wetsuit Batik Sarong Women ladies watches online

Sunday, April 25, 2010

Tungsten Electrodes For TIG Welding - What's the Big Deal With Sharpening?

Tungsten electrodes are available in Thoriated, lanthanated, ceriated, and a few other varieties. When you are welding steel, they all have one thing in common.

They need to be sharp. But is it really that important to sharpen them the way the welding textbooks describe?

I have been TIG welding for over 30 years and have sharpened tungsten electrodes all kinds of ways. Even with a cutting torch. That's right I said cutting torch. I don't recommend it, but it does work. I have also used Chem-Sharp, belt sanders, small 90 die grinders, bench grinders, big electric grinders, and even the new high dollar tungsten electrode grinders.

The bottom line is this. Unless you are welding razor blades, a lot of the anal retentive textbook methods for sharpening tungsten electrodes just don't make much difference. I know I am going to get a lot of hate mail over this but it's just plain true. Like most welders, I was taught in welding school that a bench grinder with a stone devoted exclusively for tungsten was the only way to sharpen tungsten. And that all the scratches from grinding had to run parallel with the electrode.

Then I got a job.

The real world has a way of separating the BS from the down and dirty stuff that really works and Its kind of hard to sharpen a tungsten to textbook standards when you are up 60 feet in the air on a scaffold and need to tie in a weld before the next wave of steam leaks past the safety valve. And If you have a small grinder in your tool bucket you do the math pretty quick and give it a try. I learned quickly that as long as I used a smooth enough grinding disc, spiraling grinding marks be damned, everything turned out fine. A couple of hundred good x rays without a tungsten grinder also tend to make you think you are not doing everything wrong.

So is this whole tungsten electrode sharpening thing getting Big-Dealed?

Yes and No. It definitely sells tungsten sharpeners.

Seriously, I can think of a few applications where textbook tungsten sharpening is important . Razor blade type thicknesses would be one, Another example is for automated processes like orbital TIG welding. In orbital TIG welding it is pretty common to join stainless or titanium tubing that is only ¼ " in diameter with wall thickness of less than .030". Amperage for these type welds is very low and even small changes in tungsten electrode preparation can really make a difference. Since the geometry of an electrode tip definitely does have an effect on the arc, you will want to use a special tungsten grinder to get every taper and tip consistent so that when something goes wrong, you can eliminate tungsten preparation as a variable.

But If you are TIG welding something like a 1/8" thick bracket for a set of headers, Don't sweat it. Just use a clean sharp electrode sharpened however you choose and weld the dog crap out of it.

Barbie Jeep Store

Sunday, April 4, 2010

Start a Welding Business - How to Buy Used Welding Equipment

One of the things that seems to confuse welders who want to start a welding business is the purchase of welding equipment. There are so many options available that its hard to know where to begin. And you do not want to make any mistakes here because unlike buying a car or a new set of golf clubs, this decision can really make the difference between being successful or failing. For example: Should you buy new or used welding equipment? What brand is the best? Miller, Lincoln, Esab, Hobart? Should you get a multi process machine like the Miller Shopmaster that is capable of Tig, Mig, Flux core, and stick welding? Or should you buy a separate machine for each process? Oxyfuel cutting outfit or plasma cutter? Air compressor or electric grinders? You see what I mean?

This article about starting a welding business is strictly opinion but it is based on solid experience. It is only because I have a welding business that I feel qualified to weigh in on how to start a welding business.

Here is what I would do in a down and dirty nutshell:

Stay away from multi process machines like the Miller Shopmaster unless you get a smoking good deal on one and intend to use it for only one process. Why? It just takes too much time to swap processes and the hoses, torches, and cables are downright unmanageable.

For your main Tig welding machine, try to locate a Miller syncrowave 250 on eBay or craigslist. If you are patient, you can find one with all the accessories for 2000 bones or less. A bargain.

For a Mig welding machine, again shop eBay or craigslist for a Millermatic 250 or 251.

Somewhere around 1000 bucks is a good deal. Anything less is a steal.

If you are cramped for space, a foldable welding table or two is the ticket. They are strong and you can hang them on the wall to get them out of the way.

You can get by with electric grinders at first and I would definitely get a couple of straight grinders and 4 1/2 inch angle grinders with a good assortment of consumables.

If you have a shop and not just the garage in your home, I would recommend an oxyfuel cutting, welding, and heating kit. Very useful. Owners size cylinders are roughly 175 each and the torch kit along with cart might cost another 300. Thats a total of 650 dollars. But you need it.

In fact, you really need to have a spare cylinder for all your processes. Welding gas cylinders are available in basically two kinds: leased cylinders which are the full sized cylinders used in industry, and owners cylinders. Owners cylinders are usually about 125 cubic feet or roughly half the capacity of the big ones. I recommend getting two owners cylinders for everything. Why? Because running out of argon on Saturday evening when the job is due out Monday morning is not bad for business. Having an extra owners bottle will not add to your monthly expenses and buys you time in getting your main cylinder refilled.

2 argon, 2 argon/co2, 2 acetylene, 2 oxygen at roughly 175 each = 8x175=1400

So here is the breakdown:


Used Miller syncrowave 250 2000

Used Millermatic 250 or 251 1000






8 gas cylinders 1400






4 grinders 2 straight, 2 angle 500






Oxyfuel kit 300






Miller spectrum 375 plasma cutter 1400






2 foldable Welding tables 300






Total 6900

This list is a great beginning toward starting you own welding business.

Push Lawn Mower Online Hottest Deals Outlet Online Sale Bagless Vacuum Cleaner

Saturday, April 3, 2010

Welding Gases

There are a variety of different types of gases that are used in welding. One of the major ways that gases are used is for shielding the area to be welded from gases that come from the atmosphere. The reason the shielding area needs to be welded is because these other gases can change the way the weld looks or make it difficult to use.

Whether a gas is used, the type of gas, and how it is used will be determined by the welding process that is used. Some of the most common gases and their uses are listed here:

Acetylene Gas -- this is a flammable gas that is also colorless and some people say it smells like garlic. The periodic table designation is C2H2. This gas gets the hottest of all hydrocarbon gases because it has a structure that is called triple bon. When you combine this gas with oxygen, which is how it is often used, the temperature of the flame can get as high as 5580 degrees Fahrenheit. This gas can be used for small or large projects. This gas is often called Oxyacetylene when it is also combined with oxygen.

Uses: bracing, welding, cutting and soldering and they are usually stored in pressurized steel cylinders.

Air -- believe it or not air is considered a gas in a welding situation. Air is found in bottles and is often compressed for the purpose needed in welding.

Argon -- this is a nontoxic, nonflammable and inert gas which means that it doesn't have a chemical reaction when it comes in contact with metal or other material. This is also a colorless gas and doesn't carry an odor.

Uses -- it is basically used for arch welding, the manufacturing of electronics, making steel and heat treating. Also used to weld aluminum and stainless steel (when combined with oxygen).

Oxygen -- is primarily used to work with other gases where high heat is necessary to do the weld. It is most often used with acetylene but it can also be mixed with argon and other types of gases.

Uses -- necessary when you want to use a high heat on metal.

Gases are most often used with a torch that has a regulator that can control the amount of gas that is distributed at any given time. The torch itself is attached to the regulator through hoses and the regulator is attached to the cylinders that hold the gas. Some gases like propane are in cylinders that have a short torch at the end; the torch is connected directly to the cylinder.

There are many safety precautions one should use with gases so that you cut down the risk of being hurt. Some things are common sense but it is a good idea to mention them anyway. Some of the precautions you should take include:

Store the cylinders in a place where they won't be damaged or over heated. If they are large cylinders make sure they are chained in a way that stops them from falling. If you have extra gas or cylinders with oxygen they should be stored separately.

Hottest Deals Outlet Online Body Glove Wetsuit

Sunday, March 14, 2010

TIG Welding Basics - For TIG Welders, by a TIG Welder

I hear people talk about TIG welding, but My uncle was a "heliarc welder". Whats the difference?

The "TIG" in TIG welding stands for Tungsten Inert Gas. But Before it was called TIG" it was given the name "Heliarc" because helium was the gas that was used when the process was invented. But then someone discovered that argon worked better and so it was called TIG because inert gas could refer to either helium or argon. But wait, then someone else discovered that small additions of hydrogen worked well for some metals. The word "Inert" no longer held true so the eggheads decided a new name was required. So nowadays, the technical term for what used to be called TIG and Heliarc is Gas Tungsten Arc Welding or "GTAW". But Guess what? people still call it TIG and even Heliarc. In fact more people call it TIG welding than Gas Tungsten Arc Welding.

Exactly What is TIG?

TIG welding is akin to gas welding as far as welding technique in that the torch is held in one hand and the filler rod is manipulated with the other hand. It is considered more difficult than other arc welding processes because it requires the use of both hands. Often times a foot pedal amperage control is also used which adds another layer of difficulty.

A TIG torch can be either water cooled or air cooled and is designed to provide shielding gas as well as welding current through a tungsten electrode. A ceramic nozzle directs the shielding gas to the weld puddle and internal copper parts like the collet and collet body hold the electrode in place. The tungsten electrode is sharpened for applications where the arc needs to be pinpointed and for very low amperage. The heat the melts the metal and makes the weld puddle comes from the arc that is created between the tungsten electrode and the workpiece. The arc is shielded by argon, helium, or a mixture of the two. Sometimes for certain alloys, hydrogen is added in small percentages to improve the way the puddle flows. The arc is very smooth and quiet and clean when DC current is used. When the TIG welding machine is set on Alternating current, it is slightly more noisy but still clean and smooth.

What Metals can be welded using the TIG process?

Almost any metal can be welded with TIG. Carbon and low alloys steels like 1010 carbon steel and 4130 chromoly steel,Stainless steels like 304, 321, and 17-7ph, Nickel alloys like inconel 718 and Hastelloy X, Aluminum alloys like 6061,5052, Magnesium alloys like az31b, Titanium alloys like commercially pure, and 6al4v, Cobalt alloys like Stellite 6b and l605, copper alloys like Nibral bronze and pure copper, All can be welding using the TIG welding process.

How can I learn how to TIG weld?

There are plenty of websites out there that offer basic TIG process fundamentals. www.millerwelds.com is a good resource for example. But you need more than a website to be a good TIG welder. Training and practice are critical.

I would recommend a TIG Training DVD like the one available from Hobart institute of Welding or from Miller welding along with some focussed practice on different material types.

When it comes to learning how to TIG, the 3 P's come into play:


Practice
Practice
Practice

And when it comes to the metal being welding the 3 C's are important:


Clean
Clean
Clean

Panasonic VIERA Hdtv Barbie Jeep Store Hiking Boots Online Shop